Removing Seatbelt Chime:

[17 - Instruments]
[Coding - 07] -> Long Coding Helper -> Byte 0
Bit 2-4 - Seat Belt Warning inactive

Enabling Gauge Test/Needle Sweep:

This will sweep the gauge needles through their full range automatically when you start the engine.

[17 - Instruments]
[Coding - 07] -> Long Coding Helper -> Byte 1

Bit 0 - Check the box for "Gauge Test/Needle Sweep active"

Enabling Lap Timer (on MY2010+ the oil temperature showing will be enabled as well):

[17 - Instruments]
[Coding - 07] -> Long Coding Helper -> Byte 1

Bit 3 - Check the box for "Lap Timer active"

Operating Windows and Sunroof with Remote*:
*Note, the sunroof can only be opened (tilted) with the remote, when activated in MMI (CAR>WINDOW>CONVENIENCE>SUNROOF>ON)
You need to continuously hold the remote button for the function to operate.

[Select]
[46 - Cent. Conv.]
[Coding - 07]
[Long Coding Helper]
Click on each of the Byte numbers in line 3 and you'll see the selectable options :below.
Check the box for "Comfort Operation: Remote Control active"
[Transfer Coding]
[Do It!]

Hidden menu in MMI high (2G): (Only for Navigation equipped cars)

[07 - Control Head]
[Adaptation - 10] -> Channel 8
change 0 to 1

Use this hidden menu at your own risk.
Caution: Keep away from the "Bootloader"

Hidden menu in MMI Navi Plus (3G): (Only for Navigation equipped cars)

[5F - Information Electr.]
[Adaptation - 10] -> Channel 6
change 0 to 1

Use this hidden menu at your own risk.
Caution: Keep away from the "Bootloader"

Fixing LED shut off when turn sign is on while DRL are active only:

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 3

Bit 2 - LEDs remain at full brightness with parking lights (1 = active)
Bit 7 - Turn off LED-strip DRLs with indicators (1 = active)

Turn off amber side markers (US models Only):

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 10

Submodule 0
Bit 3 - Set to 0 to disable amber side markers (U.S. vehicles)

Front Fog Lights stay on with High-beams:

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4

Bit 1 - Uncheck the box or change :Bit 1 to 0

Rear Fog Lights stay on with High-beams:

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4

Bit 2 - Uncheck the box or change :Bit 2 to 0

Headlights on all the time:

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4

Bit 5 - Check the box or change :Bit 5 to 1

Fog Light turns on with turn turn signal when Headlights active:

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 4

Bit 0- Check the box or change :Bit 0 to 1

Front Turn Signals as Parking lights:

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 10

Bit 0- Check the box or change :Bit 0 to 1

 

Once the change has been made you can enable the front turn signals as DRL's by making the following change:

[09 - Cent. Elect.]
[Coding - 07] -> Long Coding Helper -> Byte 2

Bit 6- Check the box or change :Bit 0 to 1

 

After-wipe of windscreen wipers when windscreen washer has been used:

[09 - Cent. Elect.]
[Coding - 07] -> Dropdown -> "x -- 8K1 955 119 -- WWS xxxx" -> Long Coding Helper -> Byte 1

Bit 3 - Remove check mark (1 = active)

Headlight washer - duration of wash:

[09 - Cent. Elect.]
[Security Access - 16]
[Adaptation - 10] -> Channel 6
change to e.g. 500

Disable automatic rear window wipe on the Avant, when windscreen wipers are active and the car is reversing:

[09 - Cent. Elect.]
[Security Access - 16]
[Adaptation - 10] -> Channel 19
change 1 to 0

Headlight washer - times of wash and wipe cycles between each automatic activation:

[09 - Cent. Elect.]
[Security Access - 16]
[Adaptation - 10] -> Channel 26
change to e.g. 10

Audi parking system - Switch OFF Speed:

[10 - Park/Steer Assist]
[Adaptation - 10] -> Channel 23
change to 20 (max value in km/h)

Automatic Gear selection shown in DIS:

[02- Auto Trans]
[Adaptation - 10]
Select “Single Gear Display” from top channel drop down menu
Select “D on/S on” from New value drop down menu
Select “Do It!”
Note: May have to select “Do It!” a few times to save the change

Consumption in DIS:

[17 - Instruments]
[Adaptation - 10] -> Channel 3
change 100 to xxx (see samples below)

Sample 1 - Calculation based on volume per distance (e.g. l/100km):
DIS: 9,3 l/100 km.
Real: 9,8 l/100 km. (100 * 9,8 / 9,3 = 105,38)
Channel 3 will be changed from 100 to 105

Sample 2 - Calculation based on distance per volume (e.g. MPG):
DIS: 23 MPG.
Real: 24 MPG. (100 * 23 / 24 = 95,83)
Channel 3 will be changed from 100 to 96

DIS with Efficiency Program for MY2010+ (Not a complete Program without the Start/Stop System):

[17 - Instruments]
[Adaptation - 10] -> Channel 77
change 0 to 255

DVD navigation eject lock:

[37 - Navigation]
[Adaptation - 10] -> Channel 68

0 = button active
1 = button inactive (anti-theft)

http://wiki.ross-tech.com/index.php/Audi_A4_(8K)_Navigation

Emergency Brake Flashing Lights:

[46 - Comfort System]
[Coding - 07] -> Long Coding Helper -> Byte 8

Bit 0 - Emergency Brake Flashing via Turn Lights active (1 = active)
Bit 1 - Emergency Brake Flashing via Brake Lights active (1 = active)

Phone voice control: (NOT available for MY2010)

[77 - Telephone]
[Coding - 07]

00x0x?0 - The 2nd to last digit should be changed to e.g. 2 (English (UK))

Coding

00?0xx0: MMI System
1 = MMI/Sound System High
2 = MMI/Sound System Standard

00x0?x0: Installation List
9 = Vehicle with MOST-Databus

00x0x?0: Voice Control Language
0 = Voice Control OFF
1 = German (Rest of World)
2 = English (United Kingdom)
3 = French (Rest of World)
4 = Italian (Rest of World)
5 = Spanish (Rest of World)
6 = Spanish (USA)
7 = English (USA)
8 = French (Canada)
9 = Speaker depend Voice Selection